Modeling Clay Green Stuff (Kneadatite Blue/Yellow) is a plastic epoxy putty that cures at room temperature and is available in both roll and stick form.
Cut off 50/50% or 60/40% of the yellow and blue strips, knead these two parts well until the mixture turns green and sticky. After mixing, you have about 90 minutes to model and add details. The maximum hardness is reached after 24 hours. By changing the proportions of the yellow/blue components, a faster/slower cure or more or less degree of hardness can be obtained.
Because the combined mass of resin and hardener is sticky, we recommend some form of lubricant to help maintain a smoother finish. Normally enough water is used, but some sculptors also use a little oil, petroleum jelly or Jonson oil. Always keep tools moistened. By adding talcum powder, the texture of the resin can be easily changed and fingerprints can be avoided.
We recommend storing the putty in a cool place or even refrigerating it.
This set contains 45cm (18 inches) of material with a gap between the two materials to extend their useful life and avoid waste
